Back to Blog
How-to Guides 2026-11-16 Posh Baby 0 views

How to Use the Tripp Trapp Newborn Set and Tray Together

How to Use the Tripp Trapp Newborn Set and Tray Together

The newborn set and tray serve different stages and mount to different parts of the Tripp Trapp. Here is how each piece fits, and what to check before you buy.

Two accessories, two different jobs

The Tripp Trapp newborn set and the high chair tray are often bought together, but they do not work as a pair. The newborn set clips directly onto the Tripp Trapp chair and brings your baby up to table height. The tray clips onto the Tripp Trapp Baby Set2, the seat-and-backrest accessory used once your child can sit up. In practice, you use the newborn set first and the tray later, once the Baby Set2 is on the chair.

That means the newborn set setup and the tray attachment are separate processes with separate compatibility checks. Getting both right starts with knowing which part of the chair each one mounts to.

What the newborn set requires

  • Stokke - Tripp Trapp Newborn Set Lounger - Grey: Attaches to any Tripp Trapp chair produced after May 2003, with no tools required. Check your chair's production date before ordering. If your Tripp Trapp predates May 2003, the newborn set is not confirmed to fit.
    Stokke - Tripp Trapp Newborn Set Lounger - Grey
    Stokke - Tripp Trapp Newborn Set Lounger - Grey
  • Stokke - Tripp Trapp Newborn Set Lounger - Grey: Designed for newborns from birth to 9 kg. This is the weight limit to watch. Once your baby approaches 9 kg, plan the move to the Baby Set2 and tray.
  • Stokke - Tripp Trapp Newborn Set Lounger - Grey: Two angle-adjustable positions with one-hand trigger adjustment. You can change the recline with one hand, which matters when you are holding a newborn.
  • Stokke - Tripp Trapp Newborn Set Lounger - Grey: A safety harness with padded shoulder pads, plus red-green indicators that confirm correct mounting. The indicators give you a visual checkpoint that the set is seated correctly on the chair.

Setting up the newborn set

The supplied information confirms tool-free attachment and mounting indicators, but it does not include a step-by-step assembly sequence. Follow the instructions that come with the set, and use these checkpoints as you go.

  1. Confirm your chair's age: The newborn set fits Tripp Trapp chairs produced after May 2003. Locate the production date on your chair before you begin.
  2. Attach without tools: The set attaches directly to the chair with no tools required. Seat it fully on the chair rather than resting it loosely.
  3. Check the red-green indicators: The mounting indicators confirm correct attachment. Both should read green before you place your baby in the set.
  4. Fasten the harness: Use the five-point-style safety harness with padded shoulder pads every time, and adjust the shoulder pads so they sit comfortably.
  5. Set the recline: Choose one of the two angle positions using the one-hand trigger. Pick the position that suits your newborn before you lift them in.

Where the tray fits, and where it does not

The tray does not attach to the newborn set. It clips onto the Tripp Trapp Baby Set2, which is the separate seat accessory for older babies. If you are still using the newborn set, the tray has nothing to clip to yet.

This is why the two products are often described as a sequence rather than a combination. The newborn set brings your baby to the family table; the tray gives a sitting child their own mealtime surface once the Baby Set2 is in place.

Tray compatibility and care

Adding the cushion: check the Baby Set date first

The Tripp Trapp Classic Cushions2 V2 is the cushion designed for the Baby Set2, not the newborn set. It is suitable for 6 months and up and fits all Tripp Trapp chairs, but the V2 version only works on Baby Sets manufactured after July 2024. If your Baby Set2 is older than that, the V2 cushion is not confirmed to fit.

The cushion is easy to mount and remove, with a 100% cotton cover and 100% polyester filling. The cover is described as an easy-wipe material, and the cushion carries the OCS Organic 100 Cotton Content Standard. The supplied information does not specify machine washing, so check the care label on the cushion itself.

Cushion details at a glance

Which accessory belongs to which stage

Use this as a quick reference for what mounts where. The key split is the chair itself versus the Baby Set2.

  • Newborn set: Mounts directly to Tripp Trapp chairs made after May 2003. For birth to 9 kg. No tools required.
  • Tray: Clips onto the Tripp Trapp Baby Set2. Wipe-clean, BPA-free surface. Not for use with the newborn set.
  • Classic Cushions2 V2: Fits the Baby Set2 only, for 6 months and up. V2 requires a Baby Set made after July 2024.

Planning the transition from newborn set to tray

The move happens when your baby outgrows the newborn set's 9 kg limit and is ready for the Baby Set2. At that point, the tray and the Classic Cushions2 V2 become relevant. Before you order either, check two things: that you have the Baby Set2, and that its manufacture date is after July 2024 if you want the V2 cushion.

The newborn set itself does not need the tray at any point. Its job is to hold your newborn at table height so they can join family meals, and it does that on its own. The tray's job starts later, when your child is sitting in the Baby Set2 and needs a surface of their own.

Related Articles

Customer Service
Home
Products
Cart
Profile